All MIBs › CTRON-ETHERNET-PARAMETERS-MIB › ctEtherSpeedAdminStatus
ctEtherSpeedAdminStatus
Module: CTRON-ETHERNET-PARAMETERS-MIB
OID (symbolic): CTRON-ETHERNET-PARAMETERS-MIB::ctEtherSpeedAdminStatus
OID (numeric): 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The administrative status requested by management for the speed of this port. The value of tenmegabit(2) indicates that if Auto-Negotiation is disabled for this port, that the port will operate at a speed of 10 megabits per second, provided that the port supports that speed, as specified by ctEtherSupportedSpeed.
The value of hundredmegabit(3) indicates that if Auto-Negotiation is disabled for this port, that the port will operate at a speed of 100 megabits per second, provided that the port supports that speed, as specified by ctEtherSupportedSpeed.
The value of gigabit(4) indicates that if Auto-Negotiation is disabled for this port, that the port will operate at a speed of 1000 megabits per second, provided that the port supports that speed, as specified by ctEtherSupportedSpeed.
In all cases, if the value specified does not indicate a speed that the port supports the set will fail.
What is ctEtherSpeedAdminStatus?
This is the manually configured speed setting that takes effect on this port only when Auto-Negotiation is disabled. It lets an admin force a specific fixed speed for links where negotiation has been turned off. For example, setting hundredmegabit(3) on a port connected to an older device that only supports 100Mb ensures the link runs at that speed once auto-negotiation is disabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.2 snmpwalk -v2c -c public <target> CTRON-ETHERNET-PARAMETERS-MIB::ctEtherSpeedAdminStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.2.1 snmpget -v2c -c public <target> CTRON-ETHERNET-PARAMETERS-MIB::ctEtherSpeedAdminStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.2.1 i <value>
Start monitoring Cabletron Systems Ethernet switch/hub (auto-negotiation config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-ETHERNET-PARAMETERS-MIB::ctEtherSpeedAdminStatus OID value, configure state conditions and alerts, and monitor any Cabletron Systems Ethernet switch/hub (auto-negotiation config) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CT-PRIORITY-QUEUING |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.4 | ctEthernet | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.4.2 | ctEthernetCtlParameters | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.4.2.3 | ctEtherManualConfig | CTRON-ETHERNET-PARAMETERS-MIB |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1 | ctEtherManualConfigTable | CTRON-ETHERNET-PARAMETERS-MIB |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1 | ctEtherManualConfigEntry | CTRON-ETHERNET-PARAMETERS-MIB |
| 1.3.6.1.4.1.52.4.1.2.4.2.3.1.1.2 | ctEtherSpeedAdminStatus | CTRON-ETHERNET-PARAMETERS-MIB |