CTRON-BRIDGE-MIB :: ctBridgeSdbTrIOAllowedToGoTo

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCTRON-BRIDGE-MIBctBridgeSdbTrIOAllowedToGoTo

ctBridgeSdbTrIOAllowedToGoTo

Module: CTRON-BRIDGE-MIB

OID (symbolic): CTRON-BRIDGE-MIB::ctBridgeSdbTrIOAllowedToGoTo

OID (numeric): 1.3.6.1.4.1.52.4.1.2.3.6.4.1.3

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: The set of ports to which frames received from a specific port and containing the specific packet string of the corresponding filter number are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.)

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.3.6.4.1.3
snmpwalk -v2c -c public <target> CTRON-BRIDGE-MIB::ctBridgeSdbTrIOAllowedToGoTo

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.3.6.4.1.3.1
snmpget -v2c -c public <target> CTRON-BRIDGE-MIB::ctBridgeSdbTrIOAllowedToGoTo.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.3.6.4.1.3.1 s <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ctBridgeSdbTrIOAllowedToGoTo.1

Start monitoring Cabletron/Enterasys network switch (bridge/spanning tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-BRIDGE-MIB::ctBridgeSdbTrIOAllowedToGoTo OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys network switch (bridge/spanning tree) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.52cabletronCabletron-MIB
1.3.6.1.4.1.52.4mibsCTRON-AP3000-MIB
1.3.6.1.4.1.52.4.1ctronCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.2ctDataLinkCTRON-MIB-NAMES
1.3.6.1.4.1.52.4.1.2.3ctBridgeCTRON-MIB-NAMES
Numeric OIDNameModule
1.3.6.1.4.1.52.4.1.2.3.6ctBridgeSdbTrCTRON-BRIDGE-MIB
1.3.6.1.4.1.52.4.1.2.3.6.4ctBridgeSdbTrIOTableCTRON-BRIDGE-MIB
1.3.6.1.4.1.52.4.1.2.3.6.4.1ctBridgeSdbTrIOEntryCTRON-BRIDGE-MIB
1.3.6.1.4.1.52.4.1.2.3.6.4.1.3ctBridgeSdbTrIOAllowedToGoToCTRON-BRIDGE-MIB