All MIBs › CTRON-BRIDGE-MIB › ctBridgeSdbGenericIORcvPort
ctBridgeSdbGenericIORcvPort
Module: CTRON-BRIDGE-MIB
OID (symbolic): CTRON-BRIDGE-MIB::ctBridgeSdbGenericIORcvPort
OID (numeric): 1.3.6.1.4.1.52.4.1.2.3.9.4.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Either the value '0', or the port number of the port from which a frame must be received in order for this entry's filtering information to apply. A value of '0' indicates that this entry applies on all ports of the bridge for which there is no other applicable entry.
What is ctBridgeSdbGenericIORcvPort?
This read-write integer specifies either 0, applying to any port without a more specific entry, or the exact port number a frame must be received on for this generic filter's forwarding restriction to apply. An administrator uses this to make a generic special-database filter's forwarding behavior specific to a particular ingress port rather than bridge-wide. For example, to apply a generic filter's restriction only to frames entering on a specific FDDI ring port, the admin sets this value to that port's number instead of 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.3.9.4.1.2 snmpwalk -v2c -c public <target> CTRON-BRIDGE-MIB::ctBridgeSdbGenericIORcvPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.1.2.3.9.4.1.2.1 snmpget -v2c -c public <target> CTRON-BRIDGE-MIB::ctBridgeSdbGenericIORcvPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.1.2.3.9.4.1.2.1 i <value>
Start monitoring Cabletron/Enterasys network switch (bridge/spanning tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-BRIDGE-MIB::ctBridgeSdbGenericIORcvPort OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys network switch (bridge/spanning tree) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.1 | ctron | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2 | ctDataLink | CTRON-MIB-NAMES |
| 1.3.6.1.4.1.52.4.1.2.3 | ctBridge | CTRON-MIB-NAMES |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4.1.2.3.9 | ctBridgeSdbGeneric | CTRON-BRIDGE-MIB |
| 1.3.6.1.4.1.52.4.1.2.3.9.4 | ctBridgeSdbGenericIOTable | CTRON-BRIDGE-MIB |
| 1.3.6.1.4.1.52.4.1.2.3.9.4.1 | ctBridgeSdbGenericIOEntry | CTRON-BRIDGE-MIB |
| 1.3.6.1.4.1.52.4.1.2.3.9.4.1.2 | ctBridgeSdbGenericIORcvPort | CTRON-BRIDGE-MIB |