All MIBs › CTRON-AP3000-MIB › apRestartControl
apRestartControl
Module: CTRON-AP3000-MIB
OID (symbolic): CTRON-AP3000-MIB::apRestartControl
OID (numeric): 1.3.6.1.4.1.52.4.13.16.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1).
What is apRestartControl?
Setting this object to warmBoot(2) restarts the AP's application software while keeping its current saved configuration, while coldBoot(3) resets all configuration to factory defaults before restarting. An admin uses warmBoot for routine reboots after a configuration change, and reserves coldBoot for situations where they deliberately want to wipe custom settings and start over. For example, if an AP has become badly misconfigured and the admin wants a clean slate, they would set apRestartControl to coldBoot(3) rather than warmBoot(2).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.13.16.2 snmpwalk -v2c -c public <target> CTRON-AP3000-MIB::apRestartControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.13.16.2.1 snmpget -v2c -c public <target> CTRON-AP3000-MIB::apRestartControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.13.16.2.1 i <value>
Start monitoring Enterasys/Cabletron AP3000 wireless access point with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-AP3000-MIB::apRestartControl OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron AP3000 wireless access point from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.13 | ctronAP3000 | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.13.16 | apResetMgt | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.13.16.2 | apRestartControl | CTRON-AP3000-MIB |