All MIBs › CTRON-AP3000-MIB › apRadioSecurityWEPAuthType
apRadioSecurityWEPAuthType
Module: CTRON-AP3000-MIB
OID (symbolic): CTRON-AP3000-MIB::apRadioSecurityWEPAuthType
OID (numeric): 1.3.6.1.4.1.52.4.13.7.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This value indicates the type of WEP authentication in use for this radio interface. opensystem(0) Set authentication open sharedkey(1) Set authentication shared wpa(2) Set WPA Mode wpapsk(3) Set WPA-PSK Mode wpa-wpa2-mixed(4) Set WPA-WPA2-Mixed Mode wpawpa2pskmixed(5) Set WPA-WPA2 PSK Mixed Mode wpa2(6) Set WPA2 Mode wpa2psk(7) Set WPA2-PSK Mode
What is apRadioSecurityWEPAuthType?
This selects which authentication scheme this radio interface uses for clients, ranging from legacy open-system or shared-key WEP up through WPA and WPA-PSK modes. An admin sets this to match the security level required for the deployment, since older devices might only support WEP while modern devices should use WPA modes. For example, an admin securing a modern deployment would set apRadioSecurityWEPAuthType to wpapsk(3) rather than the legacy opensystem(0) or sharedkey(1) options.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.4.13.7.1.1.2 snmpwalk -v2c -c public <target> CTRON-AP3000-MIB::apRadioSecurityWEPAuthType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.4.13.7.1.1.2.1 snmpget -v2c -c public <target> CTRON-AP3000-MIB::apRadioSecurityWEPAuthType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.4.13.7.1.1.2.1 i <value>
Start monitoring Enterasys/Cabletron AP3000 wireless access point with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTRON-AP3000-MIB::apRadioSecurityWEPAuthType OID value, configure state conditions and alerts, and monitor any Enterasys/Cabletron AP3000 wireless access point from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.4 | mibs | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.13 | ctronAP3000 | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.13.7 | apSecurityMgnt | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.13.7.1 | apRadioSecurityTable | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.13.7.1.1 | apRadioSecurityEntry | CTRON-AP3000-MIB |
| 1.3.6.1.4.1.52.4.13.7.1.1.2 | apRadioSecurityWEPAuthType | CTRON-AP3000-MIB |