All MIBs › CTELS100-NG-MIB › els100SwitchVlanPorts
els100SwitchVlanPorts
Module: CTELS100-NG-MIB
OID (symbolic): CTELS100-NG-MIB::els100SwitchVlanPorts
OID (numeric): 1.3.6.1.4.1.52.1011.3.13.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The set of ports in the VLAN. For systems supporting tagged VLAN's, these are the ports to which packets on the VLAN are sent untagged. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus each port of the system is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the VLAN; the port is not included if its bit has a value of '0'.
What is els100SwitchVlanPorts?
This defines the set of ports belonging to this VLAN, where each octet in the value represents eight ports and, on systems supporting tagged VLANs, these are the ports where packets on the VLAN are sent untagged. It's how an admin assigns specific access ports to a VLAN for stations that don't need to see VLAN tags. An admin adding several ports as untagged members of a VLAN would set the corresponding bits in els100SwitchVlanPorts.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.52.1011.3.13.1.3 snmpwalk -v2c -c public <target> CTELS100-NG-MIB::els100SwitchVlanPorts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.52.1011.3.13.1.3.1 snmpget -v2c -c public <target> CTELS100-NG-MIB::els100SwitchVlanPorts.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.52.1011.3.13.1.3.1 s <value>
Start monitoring Cabletron/Enterasys ELS100 Next Generation Ethernet switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTELS100-NG-MIB::els100SwitchVlanPorts OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ELS100 Next Generation Ethernet switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.52 | cabletron | Cabletron-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.52.1011 | els100 | CTELS100-NG-MIB |
| 1.3.6.1.4.1.52.1011.3 | els100Switch | CTELS100-NG-MIB |
| 1.3.6.1.4.1.52.1011.3.13 | els100SwitchVlanConfigTable | CTELS100-NG-MIB |
| 1.3.6.1.4.1.52.1011.3.13.1 | els100SwitchVlanEntry | CTELS100-NG-MIB |
| 1.3.6.1.4.1.52.1011.3.13.1.3 | els100SwitchVlanPorts | CTELS100-NG-MIB |