All MIBs › CTATX-MIB › sfddiRxParitys
sfddiRxParitys
Module: CTATX-MIB
OID (symbolic): CTATX-MIB::sfddiRxParitys
OID (numeric): 1.3.6.1.4.1.97.3.8.1.1.3
Node type: OBJECT-TYPE
Type: Counter
Access: read-write
Description: The number of packets that were discarded due to parity errors.
What is sfddiRxParitys?
This read-write Counter counts packets discarded on an FDDI port because of parity errors detected during reception. Network staff track this to spot signal integrity problems on the FDDI ring, such as a marginal fiber connection or transceiver. A sudden jump in sfddiRxParitys after a cable was reseated would suggest that connector still isn't seated properly.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.8.1.1.3 snmpwalk -v2c -c public <target> CTATX-MIB::sfddiRxParitys
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.8.1.1.3.1 snmpget -v2c -c public <target> CTATX-MIB::sfddiRxParitys.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.8.1.1.3.1 i <value>
Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::sfddiRxParitys OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.3 | ecs_1 | CTATX-MIB |
| 1.3.6.1.4.1.97.3.8 | sfddi | CTATX-MIB |
| 1.3.6.1.4.1.97.3.8.1 | sfddiTable | CTATX-MIB |
| 1.3.6.1.4.1.97.3.8.1.1 | sfddiEntry | CTATX-MIB |
| 1.3.6.1.4.1.97.3.8.1.1.3 | sfddiRxParitys | CTATX-MIB |