All MIBs › CTATX-MIB › filterFlags
filterFlags
Module: CTATX-MIB
OID (symbolic): CTATX-MIB::filterFlags
OID (numeric): 1.3.6.1.4.1.97.3.10.7.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: A set of flag bits which control the operation of the filter. Filters will not prevent packets from being accepted by the ES/1 as a final destination. The following bits are used: bit 13, bit 12, bit 11, bit 10. bits 9-8 used for filterFrame. bits 7-6 used for filterSource, filterSourceEnd, and filterSourceMask. bits 5-4 used for filterDest, filterDestEnd, and filterDestMask. bits 3-2 used for filterSrcLan. bits 1-0 used for filterField, filterOffset, and filterMask.
What is filterFlags?
This read-write INTEGER is a bitfield where different bit ranges enable and control which of the other filter fields (frame type, source/dest address ranges and masks, source LAN) are active for a given filter entry, and the description notes filters never block packets destined for the ES/1 itself. An admin sets specific bits here to activate only the match criteria relevant to a particular filter, such as source address matching without destination matching. Clearing the bits governing filterDest and filterDestEnd would let an admin build a filter that only cares about source address ranges, ignoring destination entirely.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.3.10.7.1.5 snmpwalk -v2c -c public <target> CTATX-MIB::filterFlags
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.3.10.7.1.5.1 snmpget -v2c -c public <target> CTATX-MIB::filterFlags.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.3.10.7.1.5.1 i <value>
Start monitoring Cabletron/Enterasys ATX switch module with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CTATX-MIB::filterFlags OID value, configure state conditions and alerts, and monitor any Cabletron/Enterasys ATX switch module from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.3 | ecs_1 | CTATX-MIB |
| 1.3.6.1.4.1.97.3.10 | filter | CTATX-MIB |
| 1.3.6.1.4.1.97.3.10.7 | filterTable | CTATX-MIB |
| 1.3.6.1.4.1.97.3.10.7.1 | filterEntry | CTATX-MIB |
| 1.3.6.1.4.1.97.3.10.7.1.5 | filterFlags | CTATX-MIB |