All MIBs › CT-ELS100-MIB › kxmirrorDiagPort
kxmirrorDiagPort
Module: CT-ELS100-MIB
OID (symbolic): CT-ELS100-MIB::kxmirrorDiagPort
OID (numeric): 1.3.6.1.4.1.97.8.12.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This entry identifies the diagnostic port to which mirrored packet will be destined.
What is kxmirrorDiagPort?
This read-write INTEGER identifies which physical port is designated as the diagnostic port that receives mirrored traffic. An administrator sets it to the port where their protocol analyzer or packet capture tool is physically connected. For example, an admin plugging a laptop running Wireshark into port 24 would set kxmirrorDiagPort to 24 so mirrored packets are delivered there.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.97.8.12.2 snmpwalk -v2c -c public <target> CT-ELS100-MIB::kxmirrorDiagPort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.97.8.12.2.1 snmpget -v2c -c public <target> CT-ELS100-MIB::kxmirrorDiagPort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.97.8.12.2.1 i <value>
Start monitoring Cabletron ELS100 series Ethernet switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CT-ELS100-MIB::kxmirrorDiagPort OID value, configure state conditions and alerts, and monitor any Cabletron ELS100 series Ethernet switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.97 | sigma | CT-ELS10-27-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.97.8 | els_100 | CT-ELS100-MIB |
| 1.3.6.1.4.1.97.8.12 | kxmirrorgroup | CT-ELS100-MIB |
| 1.3.6.1.4.1.97.8.12.2 | kxmirrorDiagPort | CT-ELS100-MIB |