All MIBs › CPQNTFTP-MIB › cpqnTftpTransferState
cpqnTftpTransferState
Module: CPQNTFTP-MIB
OID (symbolic): CPQNTFTP-MIB::cpqnTftpTransferState
OID (numeric): 1.3.6.1.4.1.232.121.9.5.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: DURABLE: This object configures this entry's type of TFTP transfer (download/upload) and when it occurs after cpqnTftpInitiate is set appropriately (immediately or after the next restart). Note that multiple cpqnTftpTable entries may enable TFTP transfers; the order in which the entries are processed is left to the agent.
After the TFTP transfer has been completed (successfully or not), the agent sets this object back to no-download-ipr(1). If the agent is restarted before the transfer occurs, then this object's value is retained.
Support for download-afterboot(3) and upload-to-nms(4) is optional. Attempts to set this object to an unsupported value are rejected with a Bad Value error. The cpqnTftpCanDldAfterBoot object indicates whether or not the agent supports download-afterboot(3). Refer to product-specific documentation for information on upload-to-nms(4).
What is cpqnTftpTransferState?
This read-write value, DURABLE across reboots, configures this entry's transfer direction and timing, choosing among no-download-ipr, download, download-afterboot, and upload-to-nms, and the agent resets it back to no-download-ipr(1) automatically once the transfer completes. An admin sets this to control exactly when a configured transfer actually happens relative to cpqnTftpInitiate and the next restart. For example, setting this to download-afterboot(3) stages a firmware download to occur only after the unit's next reboot rather than immediately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.232.121.9.5.1.6 snmpwalk -v2c -c public <target> CPQNTFTP-MIB::cpqnTftpTransferState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.232.121.9.5.1.6.1 snmpget -v2c -c public <target> CPQNTFTP-MIB::cpqnTftpTransferState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.232.121.9.5.1.6.1 i <value>
Start monitoring Compaq/HP managed network switch/server management controller (TFTP firmware transfer) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPQNTFTP-MIB::cpqnTftpTransferState OID value, configure state conditions and alerts, and monitor any Compaq/HP managed network switch/server management controller (TFTP firmware transfer) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.232 | compaq | COMPAQ-ID-REC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.232.121 | cpqnCommon | CPQNTFTP-MIB |
| 1.3.6.1.4.1.232.121.9 | cpqnTftpConfig | CPQNTFTP-MIB |
| 1.3.6.1.4.1.232.121.9.5 | cpqnTftpTable | CPQNTFTP-MIB |
| 1.3.6.1.4.1.232.121.9.5.1 | cpqnTftpEntry | CPQNTFTP-MIB |
| 1.3.6.1.4.1.232.121.9.5.1.6 | cpqnTftpTransferState | CPQNTFTP-MIB |