CPE-DSL-MIB :: cpeSystemTrapEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCPE-DSL-MIBcpeSystemTrapEnable

cpeSystemTrapEnable

Module: CPE-DSL-MIB

OID (symbolic): CPE-DSL-MIB::cpeSystemTrapEnable

OID (numeric): 1.3.6.1.4.1.16972.2.1.4

Node type: OBJECT-TYPE

Type: EnableAdmin

Access: read-write

Description: trap notification switch, if set to Disable CPE will not send trap notification untill it is set to enable

What is cpeSystemTrapEnable?

This read-write EnableAdmin object is the master switch controlling whether the CPE emits SNMP trap notifications at all. An admin disables it temporarily to silence a noisy device during maintenance, knowing no traps of any kind will arrive until it is set back to enable. For example, before swapping a line card that will cause link-down flaps, an operator sets this to disable so the NMS is not flooded with transient alarms.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.16972.2.1.4
snmpwalk -v2c -c public <target> CPE-DSL-MIB::cpeSystemTrapEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.16972.2.1.4.1
snmpget -v2c -c public <target> CPE-DSL-MIB::cpeSystemTrapEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.16972.2.1.4.1 s <value>

Start monitoring Huawei xDSL CPE modem/router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPE-DSL-MIB::cpeSystemTrapEnable OID value, configure state conditions and alerts, and monitor any Huawei xDSL CPE modem/router from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.16972cpeDSLCPE-DSL-MIB
1.3.6.1.4.1.16972.2cpeConfigCPE-DSL-MIB
1.3.6.1.4.1.16972.2.1cpeSystemCPE-DSL-MIB
1.3.6.1.4.1.16972.2.1.4cpeSystemTrapEnableCPE-DSL-MIB