All MIBs › CPE-DSL-MIB › cpeSystemSave
cpeSystemSave
Module: CPE-DSL-MIB
OID (symbolic): CPE-DSL-MIB::cpeSystemSave
OID (numeric): 1.3.6.1.4.1.16972.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: saving the CPE s configuration to NVRAM
What is cpeSystemSave?
Setting this read-write INTEGER to save(1) instructs the CPE to write its current running configuration into NVRAM. An admin invokes it after making configuration changes over SNMP so the settings persist across the next power loss or reboot. For example, after adjusting the PVC encapsulation type, an operator sets this OID to make sure the new setting is not lost when the customer unplugs the modem.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.16972.2.1.2 snmpwalk -v2c -c public <target> CPE-DSL-MIB::cpeSystemSave
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.16972.2.1.2.1 snmpget -v2c -c public <target> CPE-DSL-MIB::cpeSystemSave.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.16972.2.1.2.1 i <value>
Start monitoring Huawei xDSL CPE modem/router with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CPE-DSL-MIB::cpeSystemSave OID value, configure state conditions and alerts, and monitor any Huawei xDSL CPE modem/router from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.16972 | cpeDSL | CPE-DSL-MIB |
| 1.3.6.1.4.1.16972.2 | cpeConfig | CPE-DSL-MIB |
| 1.3.6.1.4.1.16972.2.1 | cpeSystem | CPE-DSL-MIB |
| 1.3.6.1.4.1.16972.2.1.2 | cpeSystemSave | CPE-DSL-MIB |