COSINE-ORION-MIB :: csOrionL2tpSessionRWS

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOSINE-ORION-MIBcsOrionL2tpSessionRWS

csOrionL2tpSessionRWS

Module: COSINE-ORION-MIB

OID (symbolic): COSINE-ORION-MIB::csOrionL2tpSessionRWS

OID (numeric): 1.3.6.1.4.1.3085.3.1.6.13.3.1.3

Node type: OBJECT-TYPE

Type: Integer32

Access: read-only

Description: This object controls the size of the session receive window. It will be advertised to the peer during session setup if csOrionL2tpConfigSessionFlowControl is set to Enable.

The value 0 has special significance. It indicates that the peer must include sequence numbers in payload packets but the peer need not flow control its transmissions. This can be used to force a peer that is non-RFC compliant to include sequence numbers in payload packets.

What is csOrionL2tpSessionRWS?

This read-only Integer32 sets the size of this device's session-level receive window, advertised to the peer during session setup only if flow control is enabled, with the special value 0 meaning the peer must still include sequence numbers in payload packets even though no actual flow control is imposed. It's used to force sequencing on non-RFC-compliant peers without incurring the overhead of full flow control. A value of 0 here on a session to a legacy device would explain why payload packets carry sequence numbers despite flow control appearing off.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.6.13.3.1.3
snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csOrionL2tpSessionRWS

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.6.13.3.1.3.1
snmpget -v2c -c public <target> COSINE-ORION-MIB::csOrionL2tpSessionRWS.1

Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csOrionL2tpSessionRWS OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3085csRootCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3csProductCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3.1csOrionMIBCOSINE-GLOBAL-REG
Numeric OIDNameModule
1.3.6.1.4.1.3085.3.1.6csOrionServiceInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.13csOrionL2tpInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.13.3csOrionL2tpSessionTableCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.13.3.1csOrionL2tpSessionEntryCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.13.3.1.3csOrionL2tpSessionRWSCOSINE-ORION-MIB