All MIBs › COSINE-ORION-MIB › csOrionL2tpConfigTunnelHelloInterval
csOrionL2tpConfigTunnelHelloInterval
Module: COSINE-ORION-MIB
OID (symbolic): COSINE-ORION-MIB::csOrionL2tpConfigTunnelHelloInterval
OID (numeric): 1.3.6.1.4.1.3085.3.1.6.13.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object defines the interval (in seconds) in which HELLO (or keep-alive) packets are to be sent to the tunnel peer. Setting this to 0 disables sending of HELLO packets
What is csOrionL2tpConfigTunnelHelloInterval?
This read-write Integer32 (0-3600 seconds) sets how often HELLO keepalive packets are sent to the L2TP tunnel peer, with 0 disabling HELLO packets entirely. An admin sets a nonzero interval to detect a dead tunnel peer that stopped responding without properly tearing down the tunnel. For example, disabling HELLO packets by setting this to 0 might be done on a very stable, low-bandwidth link to avoid the periodic keepalive overhead, at the cost of slower detection of a silently failed peer.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.6.13.1.1.5 snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csOrionL2tpConfigTunnelHelloInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.6.13.1.1.5.1 snmpget -v2c -c public <target> COSINE-ORION-MIB::csOrionL2tpConfigTunnelHelloInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3085.3.1.6.13.1.1.5.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> csOrionL2tpConfigTunnelHelloInterval.1
Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csOrionL2tpConfigTunnelHelloInterval OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3085 | csRoot | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3 | csProduct | COSINE-GLOBAL-REG |
| 1.3.6.1.4.1.3085.3.1 | csOrionMIB | COSINE-GLOBAL-REG |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3085.3.1.6 | csOrionServiceInfo | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.6.13 | csOrionL2tpInfo | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.6.13.1 | csOrionL2tpConfigTable | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1 | csOrionL2tpConfigEntry | COSINE-ORION-MIB |
| 1.3.6.1.4.1.3085.3.1.6.13.1.1.5 | csOrionL2tpConfigTunnelHelloInterval | COSINE-ORION-MIB |