COSINE-ORION-MIB :: csOrionL2tpConfigTunnelAuthentication

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOSINE-ORION-MIBcsOrionL2tpConfigTunnelAuthentication

csOrionL2tpConfigTunnelAuthentication

Module: COSINE-ORION-MIB

OID (symbolic): COSINE-ORION-MIB::csOrionL2tpConfigTunnelAuthentication

OID (numeric): 1.3.6.1.4.1.3085.3.1.6.13.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object controls the tunnel authentication. If set to Enable, a challenge will be sent to the peer during tunnel creation. The tunnel will be torn down if the peer does not send a valid response. Regardless of the setting, if the peer sends a challenge during tunnel creation, a response will be sent.

What is csOrionL2tpConfigTunnelAuthentication?

This read-write enable/disable object controls whether this device challenges the L2TP tunnel peer during tunnel creation and tears the tunnel down if the peer fails to respond validly, while regardless of this setting the device will always respond if the peer itself sends a challenge. An admin enables this to prevent unauthorized or misconfigured peers from establishing tunnels to this device. For example, enabling tunnel authentication ensures that only a peer possessing the shared secret can successfully bring up an L2TP tunnel, rejecting connection attempts from unrecognized devices.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.6.13.1.1.4
snmpwalk -v2c -c public <target> COSINE-ORION-MIB::csOrionL2tpConfigTunnelAuthentication

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3085.3.1.6.13.1.1.4.1
snmpget -v2c -c public <target> COSINE-ORION-MIB::csOrionL2tpConfigTunnelAuthentication.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.3085.3.1.6.13.1.1.4.1 i <value>

Start monitoring CoSine Communications IPNOS blade-based service platform with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COSINE-ORION-MIB::csOrionL2tpConfigTunnelAuthentication OID value, configure state conditions and alerts, and monitor any CoSine Communications IPNOS blade-based service platform from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3085csRootCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3csProductCOSINE-GLOBAL-REG
1.3.6.1.4.1.3085.3.1csOrionMIBCOSINE-GLOBAL-REG
Numeric OIDNameModule
1.3.6.1.4.1.3085.3.1.6csOrionServiceInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.13csOrionL2tpInfoCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.13.1csOrionL2tpConfigTableCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.13.1.1csOrionL2tpConfigEntryCOSINE-ORION-MIB
1.3.6.1.4.1.3085.3.1.6.13.1.1.4csOrionL2tpConfigTunnelAuthenticationCOSINE-ORION-MIB