COPPER-MOUNTAIN-NETWORKS-DSL-MIB :: cmSDSLTestAction

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOPPER-MOUNTAIN-NETWORKS-DSL-MIBcmSDSLTestAction

cmSDSLTestAction

Module: COPPER-MOUNTAIN-NETWORKS-DSL-MIB

OID (symbolic): COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmSDSLTestAction

OID (numeric): 1.3.6.1.4.1.1996.10.3.4.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This field is used by the operator to start/stop the loop test on an SDSL modem. The value None is a read-only value that is displayed. The operator sets the action to Start to start a test, and Stop to stop a test.

What is cmSDSLTestAction?

A read-write enumerated value the operator uses to start or stop a loop test on an SDSL modem, with "none" being a read-only display value. This is the actual control an admin sets to kick off line diagnostics remotely rather than needing physical access to the modem, useful for troubleshooting a suspect line from a NOC. To diagnose a suspected cable fault on a customer's SDSL line, the admin would set cmSDSLTestAction to start, let the test run, then set it to stop once results are captured.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1996.10.3.4.1.2
snmpwalk -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmSDSLTestAction

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1996.10.3.4.1.2.1
snmpget -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmSDSLTestAction.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1996.10.3.4.1.2.1 i <value>

Start monitoring Copper Mountain Networks DSL access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmSDSLTestAction OID value, configure state conditions and alerts, and monitor any Copper Mountain Networks DSL access equipment (legacy) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.1996coppermountainCOPPER-MOUNTAIN-NETWORKS-DSL-MIB
1.3.6.1.4.1.1996.10cmTransmissionCOPPER-MOUNTAIN-NETWORKS-DSL-MIB
1.3.6.1.4.1.1996.10.3cmHDSLCOPPER-MOUNTAIN-NETWORKS-DSL-MIB
1.3.6.1.4.1.1996.10.3.4cmSDSLTestTableCOPPER-MOUNTAIN-NETWORKS-DSL-MIB
1.3.6.1.4.1.1996.10.3.4.1cmSDSLTestEntryCOPPER-MOUNTAIN-NETWORKS-DSL-MIB
1.3.6.1.4.1.1996.10.3.4.1.2cmSDSLTestActionCOPPER-MOUNTAIN-NETWORKS-DSL-MIB