All MIBs › COPPER-MOUNTAIN-NETWORKS-DSL-MIB › cmMaintCmdReportingPeriod
cmMaintCmdReportingPeriod
Module: COPPER-MOUNTAIN-NETWORKS-DSL-MIB
OID (symbolic): COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmMaintCmdReportingPeriod
OID (numeric): 1.3.6.1.4.1.1996.20.16.1.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The ReportingPeriod defines the valid range (number of hours) of data in the uploaded file.
For the 'configBackup' and bulkCPEDownload' commands, sets to this value are rejected and the value when read is 0.
For 'statsAuto', operator sets to this object are rejected, and the value when read is set to the value of the Recurrence object.
For 'statsManual', the operator sets this value to the number of hours of data that they would like to include in the uploaded file. The timestamps on the data uploaded will range from StartTime to StartTime + ReportingPeriod. If the StartTime + ReportingPeriod is greater than the current time, the system will upload as much data as it has collected at present.
For 'configRestore', the value of this object is ignored.
Default: 0
What is cmMaintCmdReportingPeriod?
cmMaintCmdReportingPeriod is a read-write integer defining, for the statsManual command, how many hours of historical data the operator wants included in the uploaded statistics file, while the description notes it is rejected outright for configBackup and bulkCPEDownload and forced to match cmMaintCmdRecurrence for statsAuto. An administrator sets this specifically when running a one-off manual statistics export to control how much historical data gets pulled. For example, an operator wanting the last 48 hours of DSL interval statistics would set cmMaintCmdReportingPeriod to 48 on a statsManual command entry.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1996.20.16.1.1.5 snmpwalk -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmMaintCmdReportingPeriod
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1996.20.16.1.1.5.1 snmpget -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmMaintCmdReportingPeriod.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1996.20.16.1.1.5.1 i <value>
Start monitoring Copper Mountain Networks DSL access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmMaintCmdReportingPeriod OID value, configure state conditions and alerts, and monitor any Copper Mountain Networks DSL access equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1996 | coppermountain | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20 | cmCE200 | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.16 | cmMaint | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.16.1 | cmMaintCmdTable | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.16.1.1 | cmMaintCmdEntry | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.16.1.1.5 | cmMaintCmdReportingPeriod | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |