All MIBs › COPPER-MOUNTAIN-NETWORKS-DSL-MIB › cmEndPointConfigBulkDownload
cmEndPointConfigBulkDownload
Module: COPPER-MOUNTAIN-NETWORKS-DSL-MIB
OID (symbolic): COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmEndPointConfigBulkDownload
OID (numeric): 1.3.6.1.4.1.1996.20.21.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object indicates whether the operator wants this CPE to be downloaded to the software version in the CE's code directory when a bulkCPEDownload command is issued by the operator.
When the bulkCPEDownload command is issued, if this object is set to Enabled, and the CPE is online, the system will compare the CPE SW version with the SCM SW version. If the CPE SW version is different, the system will initiate the download process with the CPE. If the CPE is not online, then the system will check at the next time the CPE becomes online.
What is cmEndPointConfigBulkDownload?
This read-write INTEGER (disabled/enabled) marks whether a given CPE should be included when a bulkCPEDownload command compares its firmware version and pushes an update. An admin enables it to roll new CPE firmware out to a specific subscriber's modem during a mass upgrade. For example, enabling cmEndPointConfigBulkDownload before issuing bulkCPEDownload triggers a firmware update on that CPE if its software version differs from the SCM's code directory.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1996.20.21.2.1.3 snmpwalk -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmEndPointConfigBulkDownload
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1996.20.21.2.1.3.1 snmpget -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmEndPointConfigBulkDownload.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1996.20.21.2.1.3.1 i <value>
Start monitoring Copper Mountain Networks DSL access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmEndPointConfigBulkDownload OID value, configure state conditions and alerts, and monitor any Copper Mountain Networks DSL access equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1996 | coppermountain | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20 | cmCE200 | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.21 | cmEndPoint | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.21.2 | cmEndPointConfigTable | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.21.2.1 | cmEndPointConfigEntry | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.21.2.1.3 | cmEndPointConfigBulkDownload | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |