All MIBs › COPPER-MOUNTAIN-NETWORKS-DSL-MIB › cmDS3AtmCellPayloadScrambling
cmDS3AtmCellPayloadScrambling
Module: COPPER-MOUNTAIN-NETWORKS-DSL-MIB
OID (symbolic): COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmDS3AtmCellPayloadScrambling
OID (numeric): 1.3.6.1.4.1.1996.10.10.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to enable/disable payload scrambling on the DS3-ATM interface.
DEFAULT: disable
What is cmDS3AtmCellPayloadScrambling?
A read-write enumerated value enabling or disabling ATM cell payload scrambling on the DS3-ATM interface, defaulting to disable. Payload scrambling must match what the far-end ATM equipment expects, so an admin sets this according to the carrier's or peer's requirement rather than leaving it at the default without checking. If a DS3-ATM link trains at the physical layer but ATM cells aren't being correctly delineated, the admin would check whether cmDS3AtmCellPayloadScrambling matches the setting used by the far-end equipment.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1996.10.10.2.1.3 snmpwalk -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmDS3AtmCellPayloadScrambling
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1996.10.10.2.1.3.1 snmpget -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmDS3AtmCellPayloadScrambling.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.1996.10.10.2.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> cmDS3AtmCellPayloadScrambling.1
Start monitoring Copper Mountain Networks DSL access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmDS3AtmCellPayloadScrambling OID value, configure state conditions and alerts, and monitor any Copper Mountain Networks DSL access equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1996 | coppermountain | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.10 | cmTransmission | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.10.10 | cmATM | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.10.10.2 | cmDS3AtmTable | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.10.10.2.1 | cmDS3AtmEntry | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.10.10.2.1.3 | cmDS3AtmCellPayloadScrambling | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |