All MIBs › COPPER-MOUNTAIN-NETWORKS-DSL-MIB › cmAlarmStartupAlarm
cmAlarmStartupAlarm
Module: COPPER-MOUNTAIN-NETWORKS-DSL-MIB
OID (symbolic): COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmAlarmStartupAlarm
OID (numeric): 1.3.6.1.4.1.1996.20.13.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The alarm that may be sent when this entry is first set to valid. If the first sample after this entry becomes valid is greater than or equal to the risingThreshold and alarmStartupAlarm is equal to risingAlarm(1) or risingOrFallingAlarm(3), then a single rising alarm will be generated. If the first sample after this entry becomes valid is less than or equal to the fallingThreshold and alarmStartupAlarm is equal to fallingAlarm(2) or risingOrFallingAlarm(3), then a single falling alarm will be generated.
This object may not be modified if the associated alarmStatus object is equal to valid(1).
What is cmAlarmStartupAlarm?
cmAlarmStartupAlarm is a read-only enumeration configuring whether a rising or falling alarm may be generated the very first time an alarm entry becomes valid, based on where that first sample falls relative to the configured thresholds. An administrator sets this so a newly activated alarm entry behaves predictably on its very first measurement rather than requiring a prior sample to compare against. For example, an alarm entry configured with risingAlarm(1) would immediately fire if its first-ever sample already sits at or above the rising threshold, rather than waiting for a subsequent crossing.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1996.20.13.1.1.6 snmpwalk -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmAlarmStartupAlarm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1996.20.13.1.1.6.1 snmpget -v2c -c public <target> COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmAlarmStartupAlarm.1
Start monitoring Copper Mountain Networks DSL access equipment (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COPPER-MOUNTAIN-NETWORKS-DSL-MIB::cmAlarmStartupAlarm OID value, configure state conditions and alerts, and monitor any Copper Mountain Networks DSL access equipment (legacy) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1996 | coppermountain | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20 | cmCE200 | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.13 | cmAlarm | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.13.1 | cmAlarmTable | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.13.1.1 | cmAlarmEntry | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |
| 1.3.6.1.4.1.1996.20.13.1.1.6 | cmAlarmStartupAlarm | COPPER-MOUNTAIN-NETWORKS-DSL-MIB |