CONFIG-MIB :: hpSwitchSLinkModemConnTime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCONFIG-MIBhpSwitchSLinkModemConnTime

hpSwitchSLinkModemConnTime

Module: CONFIG-MIB

OID (symbolic): CONFIG-MIB::hpSwitchSLinkModemConnTime

OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The number of seconds to wait for data mode and clear to send and receiver ready signals after asserting request to send and terminal ready signals. Valid values are 0(switch will wait forever for the modem) through 300(5 minutes).

What is hpSwitchSLinkModemConnTime?

This read-write integer (0-300 seconds) sets how long the switch waits for a dial-up modem's data-mode and clear-to-send/data-set-ready signals after asserting request-to-send and terminal-ready, with 0 meaning wait forever. Admins tune it for modem-based out-of-band console access, balancing patience for a slow modem against getting stuck waiting indefinitely. For example, an admin relying on a dial-up modem for emergency out-of-band console access would set hpSwitchSLinkModemConnTime to a reasonable timeout like 60 seconds rather than waiting forever.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.4
snmpwalk -v2c -c public <target> CONFIG-MIB::hpSwitchSLinkModemConnTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.4.1
snmpget -v2c -c public <target> CONFIG-MIB::hpSwitchSLinkModemConnTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.4.1 i <value>

Start monitoring Generic vendor-unspecified SNMP-managed network device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CONFIG-MIB::hpSwitchSLinkModemConnTime OID value, configure state conditions and alerts, and monitor any Generic vendor-unspecified SNMP-managed network device from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.14icfCONFIG-MIB
1.3.6.1.4.1.11.2.14.11hpicfObjectsCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5hpicfSwitchCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1hpSwitchCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1.7hpConfigCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1.7.1hpSwitchConfigCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1.7.1.6hpSwitchSerialLinkConfigCONFIG-MIB
1.3.6.1.4.1.11.2.14.11.5.1.7.1.6.4hpSwitchSLinkModemConnTimeCONFIG-MIB