All MIBs › CONFIG-MIB › hpSwitchProbePort
hpSwitchProbePort
Module: CONFIG-MIB
OID (symbolic): CONFIG-MIB::hpSwitchProbePort
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The port that every packet passes through those probed ports will be copied to.
What is hpSwitchProbePort?
This read-write integer (1-65535) identifies the destination port that receives a copy of every packet passing through the probed ports or VLAN. Admins connect their protocol analyzer or IDS to this port to capture the mirrored traffic. For example, an admin setting up a packet capture would plug their laptop into the port specified by hpSwitchProbePort to receive the mirrored copies.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.3 snmpwalk -v2c -c public <target> CONFIG-MIB::hpSwitchProbePort
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.3.1 snmpget -v2c -c public <target> CONFIG-MIB::hpSwitchProbePort.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.3.1 i <value>
Start monitoring Generic vendor-unspecified SNMP-managed network device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CONFIG-MIB::hpSwitchProbePort OID value, configure state conditions and alerts, and monitor any Generic vendor-unspecified SNMP-managed network device from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.9 | hpSwitchProbeConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.9.3 | hpSwitchProbePort | CONFIG-MIB |