All MIBs › CONFIG-MIB › hpSwitchFddiIpFragConfigStatus
hpSwitchFddiIpFragConfigStatus
Module: CONFIG-MIB
OID (symbolic): CONFIG-MIB::hpSwitchFddiIpFragConfigStatus
OID (numeric): 1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The operational status of FDDI IP fragmentation for each FDDI card. enable(1): FDDI card will fragment all packets which are bigger then the Ethernet packet size limitation, 1518 Bytes. disable(2): FDDI card will drop all packets which are bigger then the Ethernet packet size limitation, 1518 Bytes.
What is hpSwitchFddiIpFragConfigStatus?
This read-write enumeration controls whether a specific FDDI card fragments (enable(1)) or drops (disable(2)) packets larger than the standard 1518-byte Ethernet frame size limit. Admins enable fragmentation on FDDI cards bridging to Ethernet segments so oversized FDDI frames don't get silently dropped. For example, an admin bridging an FDDI ring to an Ethernet backbone would set hpSwitchFddiIpFragConfigStatus to enable so large FDDI frames get fragmented instead of discarded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1.2 snmpwalk -v2c -c public <target> CONFIG-MIB::hpSwitchFddiIpFragConfigStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1.2.1 snmpget -v2c -c public <target> CONFIG-MIB::hpSwitchFddiIpFragConfigStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1.2.1 i <value>
Start monitoring Generic vendor-unspecified SNMP-managed network device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CONFIG-MIB::hpSwitchFddiIpFragConfigStatus OID value, configure state conditions and alerts, and monitor any Generic vendor-unspecified SNMP-managed network device from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5 | hpicfSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1 | hpSwitch | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7 | hpConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1 | hpSwitchConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.11 | hpSwitchFddiIpFragConfig | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1 | hpSwitchFddiIpFragConfigTable | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1 | hpSwitchFddiIpFragConfigEntry | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.5.1.7.1.11.1.1.2 | hpSwitchFddiIpFragConfigStatus | CONFIG-MIB |