All MIBs › CONEL-IO-MIB › ioOut1
ioOut1
Module: CONEL-IO-MIB
OID (symbolic): CONEL-IO-MIB::ioOut1
OID (numeric): 1.3.6.1.4.1.30140.2.3.4
Node type: OBJECT-TYPE
Type: Gauge
Access: read-write
What is ioOut1?
Also undocumented, but consistent with ioOut0, this is the read-write control for the router's second physical digital output. An admin sets this independently of ioOut0 to control a second external device or relay connected to that specific output pin. For example, writing 0 to ioOut1 would de-energize that second output line, distinct from whatever state ioOut0 is currently set to.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.30140.2.3.4 snmpwalk -v2c -c public <target> CONEL-IO-MIB::ioOut1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.30140.2.3.4.1 snmpget -v2c -c public <target> CONEL-IO-MIB::ioOut1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.30140.2.3.4.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ioOut1.1
Start monitoring Conel industrial cellular/IoT router (digital I/O) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CONEL-IO-MIB::ioOut1 OID value, configure state conditions and alerts, and monitor any Conel industrial cellular/IoT router (digital I/O) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.30140 | conel | CONEL-GPS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.30140.2 | protocols | CONEL-IO-MIB |
| 1.3.6.1.4.1.30140.2.3 | io | CONEL-IO-MIB |
| 1.3.6.1.4.1.30140.2.3.4 | ioOut1 | CONEL-IO-MIB |