COMTROL-ES8510-MIB :: macAddrTableAgingTime

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCOMTROL-ES8510-MIBmacAddrTableAgingTime

macAddrTableAgingTime

Module: COMTROL-ES8510-MIB

OID (symbolic): COMTROL-ES8510-MIB::macAddrTableAgingTime

OID (numeric): 1.3.6.1.4.1.2882.2.1.1.11.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This value determines the interval that an automatic learned MAC address entry remains valid in the forwarding database, since its last access as a source address, before being purged. The value should be times of 15 in seconds. The minimum age time is 15 seconds. The maximum age time is 3825 seconds or almost 64 minutes. if the value is set to 0, the aging function is disabled and all learned address will remain in the database forever.

What is macAddrTableAgingTime?

This read-write integer sets, in seconds (in multiples of 15, from 15 up to 3825), how long a dynamically learned MAC entry stays in the forwarding table since it was last seen as a source address; setting it to 0 disables aging entirely. Admins tune this to balance table freshness against churn on networks with many roaming or short-lived devices. For instance, a busy guest Wi-Fi uplink port might use a short aging time so departed devices are flushed quickly, while a stable server-room port might use the maximum to avoid unnecessary relearning.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2882.2.1.1.11.1.3
snmpwalk -v2c -c public <target> COMTROL-ES8510-MIB::macAddrTableAgingTime

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2882.2.1.1.11.1.3.1
snmpget -v2c -c public <target> COMTROL-ES8510-MIB::macAddrTableAgingTime.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2882.2.1.1.11.1.3.1 i <value>

Start monitoring Comtrol ES8510 industrial managed Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMTROL-ES8510-MIB::macAddrTableAgingTime OID value, configure state conditions and alerts, and monitor any Comtrol ES8510 industrial managed Ethernet switch from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2882comtrolCOMTROL-ES8510-MIB
1.3.6.1.4.1.2882.2productsCOMTROL-ES8510-MIB
1.3.6.1.4.1.2882.2.1managedSwitchCOMTROL-ES8510-MIB
1.3.6.1.4.1.2882.2.1.1es8510COMTROL-ES8510-MIB
1.3.6.1.4.1.2882.2.1.1.11monitorandDiagCOMTROL-ES8510-MIB
1.3.6.1.4.1.2882.2.1.1.11.1macAddressTableCOMTROL-ES8510-MIB
1.3.6.1.4.1.2882.2.1.1.11.1.3macAddrTableAgingTimeCOMTROL-ES8510-MIB