All MIBs › COMTROL-ES8510-MIB › faultSelection
faultSelection
Module: COMTROL-ES8510-MIB
OID (symbolic): COMTROL-ES8510-MIB::faultSelection
OID (numeric): 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Select the type of fault event that triggers the relay. To config a fault relay, first select the founction this relay serves for, then configure the condition that triggers the relay in detail. At last, set the faultRelayEntryStatus to active(1) or nonActive(3) to enable or disable the setting on the relay.
What is faultSelection?
This read-write setting chooses which category of condition-digital input state, timed dry-output cycling, power failure, link failure, ping failure, or others-a fault relay monitors, and it must be paired with detailed condition settings and an active faultRelayEntryStatus to actually operate. An admin selects the condition type that matches whatever physical event the relay is meant to report. For example, setting faultSelection to pingFailure(5) configures the relay to physically trip if the switch loses the ability to reach a critical upstream gateway, immediately alerting facility staff wired into that relay's alarm circuit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.2 snmpwalk -v2c -c public <target> COMTROL-ES8510-MIB::faultSelection
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.2.1 snmpget -v2c -c public <target> COMTROL-ES8510-MIB::faultSelection.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.2.1 i <value>
Start monitoring Comtrol ES8510 industrial managed Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMTROL-ES8510-MIB::faultSelection OID value, configure state conditions and alerts, and monitor any Comtrol ES8510 industrial managed Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2882 | comtrol | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2 | products | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1 | managedSwitch | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1 | es8510 | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10 | warning | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10.1 | faultRelay | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10.1.1 | faultRelayTable | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10.1.1.1 | faultRelayEntry | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.2 | faultSelection | COMTROL-ES8510-MIB |