All MIBs › COMTROL-ES8510-MIB › diConfig
diConfig
Module: COMTROL-ES8510-MIB
OID (symbolic): COMTROL-ES8510-MIB::diConfig
OID (numeric): 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The fault relay will be triggered if digital input is low or high.
What is diConfig?
This read-write setting specifies which digital input line, DI1 or DI2, and which voltage state, low or high, will trigger the fault relay, or disables digital-input triggering entirely. An admin matches this setting to how an external sensor, like a door contact, is physically wired to the digital input. For example, setting this to di1High(2) means the fault relay only trips when digital input 1 transitions to a high voltage state, such as when a connected door sensor's contact closes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.3 snmpwalk -v2c -c public <target> COMTROL-ES8510-MIB::diConfig
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.3.1 snmpget -v2c -c public <target> COMTROL-ES8510-MIB::diConfig.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.3.1 i <value>
Start monitoring Comtrol ES8510 industrial managed Ethernet switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the COMTROL-ES8510-MIB::diConfig OID value, configure state conditions and alerts, and monitor any Comtrol ES8510 industrial managed Ethernet switch from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2882 | comtrol | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2 | products | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1 | managedSwitch | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1 | es8510 | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10 | warning | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10.1 | faultRelay | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10.1.1 | faultRelayTable | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10.1.1.1 | faultRelayEntry | COMTROL-ES8510-MIB |
| 1.3.6.1.4.1.2882.2.1.1.10.1.1.1.3 | diConfig | COMTROL-ES8510-MIB |