CODAN-MIB :: wvlinkRSLLowAlarmThresholdhHigh

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCODAN-MIBwvlinkRSLLowAlarmThresholdhHigh

wvlinkRSLLowAlarmThresholdhHigh

Module: CODAN-MIB

OID (symbolic): CODAN-MIB::wvlinkRSLLowAlarmThresholdhHigh

OID (numeric): 1.3.6.1.4.1.23304.1.1.1.6.22

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Defines the high water mark above which the terminal enters the link rslLow alarm state. If wvLinkxxxRSL in a given wvLinkThresholdMeasurementInterval gets above this value a rslLow is set, to be canceled if the value gets below wvlinkRSLLowAlarmThresholdLow (see below).

What is wvlinkRSLLowAlarmThresholdhHigh?

This read-write integer, measured in dBm, defines the RSL threshold above which the terminal enters its link rslLow alarm state, to be canceled once the reading drops below the paired wvlinkRSLLowAlarmThresholdhLow value. An administrator sets this to establish the receive-signal-level boundary at which the terminal flags a low-signal condition on that hop. For example, adjusting this threshold higher on an already marginal microwave path makes the terminal more sensitive to signal weakening before it becomes critical.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.6.22
snmpwalk -v2c -c public <target> CODAN-MIB::wvlinkRSLLowAlarmThresholdhHigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.6.22.1
snmpget -v2c -c public <target> CODAN-MIB::wvlinkRSLLowAlarmThresholdhHigh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.23304.1.1.1.6.22.1 i <value>

Start monitoring Codan 8800 DMR microwave radio link equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CODAN-MIB::wvlinkRSLLowAlarmThresholdhHigh OID value, configure state conditions and alerts, and monitor any Codan 8800 DMR microwave radio link equipment from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.23304codanGroupCODAN-SMI
1.3.6.1.4.1.23304.1codanMibsCODAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.23304.1.1minetMIBCODAN-MIB
1.3.6.1.4.1.23304.1.1.1wvConfigurationCODAN-MIB
1.3.6.1.4.1.23304.1.1.1.6wvAlarmControlCODAN-MIB
1.3.6.1.4.1.23304.1.1.1.6.22wvlinkRSLLowAlarmThresholdhHighCODAN-MIB