All MIBs › CODAN-MIB › wvlinkBLER
wvlinkBLER
Module: CODAN-MIB
OID (symbolic): CODAN-MIB::wvlinkBLER
OID (numeric): 1.3.6.1.4.1.23304.1.1.3.2
Node type: OBJECT-TYPE
Type: FloatingPoint
Access: read-only
Description: Specifies the terminal's cummulative Corrected Blocks Rate since link last start-up.
What is wvlinkBLER?
This read-only floating-point object reports the terminal's cumulative rate of corrected data blocks accumulated since the link last came up. An engineer uses this alongside wvlinkBER to see how much of the raw bit errors the link's forward error correction has successfully repaired over the link's current uptime. For example, a high wvlinkBLER paired with a low wvlinkNCBLER would indicate the FEC is working hard but still keeping most errors from reaching the end user.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.3.2 snmpwalk -v2c -c public <target> CODAN-MIB::wvlinkBLER
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.3.2.1 snmpget -v2c -c public <target> CODAN-MIB::wvlinkBLER.1
Start monitoring Codan 8800 DMR microwave radio link equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CODAN-MIB::wvlinkBLER OID value, configure state conditions and alerts, and monitor any Codan 8800 DMR microwave radio link equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.23304 | codanGroup | CODAN-SMI |
| 1.3.6.1.4.1.23304.1 | codanMibs | CODAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.23304.1.1 | minetMIB | CODAN-MIB |
| 1.3.6.1.4.1.23304.1.1.3 | wvPerformance | CODAN-MIB |
| 1.3.6.1.4.1.23304.1.1.3.2 | wvlinkBLER | CODAN-MIB |