All MIBs › CODAN-MIB › wvOduPartNo
wvOduPartNo
Module: CODAN-MIB
OID (symbolic): CODAN-MIB::wvOduPartNo
OID (numeric): 1.3.6.1.4.1.23304.1.1.1.7.7
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The Codan 8800 DMR ODU Part No. is defined as ODU-'xwyzt', as follows: x - Standard: x=1 - FCC(US), x=2 - ETSI(European) w - Duplex Spacing: standard frequency left digit value duplex FCC 38 1 700 FCC 23 1 1200 FCC 18 1 1560 ETSI 38 1 1260 ETSI 26 1 1008 ETSI 23 1 1200 ETSI 23 2 1008 ETSI 23 3 1232 ETSI 18 1 1010 ETSI 18 2 1008 ETSI 15 1 315 ETSI 15 2 420 ETSI 15 3 728 ETSI 15 4 644 ETSI 15 5 490 ETSI 15 6 322 ETSI 13 1 266 ETSI 10 1 65 ETSI 10 2 91 ETSI 10 3 65 ETSI 10 4 65 ETSI 10 5 91 ETSI 10 6 91 ETSI 10 7 91 ETSI 8 1 311.32 ETSI 8 2 126 ETSI 8 3 119 ETSI 7 1 154 (7125-7425) ETSI 7 2 154 (7425-7725) ETSI 7 3 161 (7125-7425) ETSI 7 4 161 (7425-7725) ETSI 7 5 245 ETSI 7 6 161 (7250-7550)
y - Frequency Band: y=1-4 - Band 1-4 zt- Spectrum Range Allocation (in Ghz): 38, 23, 18, etc...
Example: ODU-2-1-4-23 = ETSI, duplex spacing 1200MHz / band 4, 23GHz.
The rules governing the Frequency Band correlation of the 2 terminals usage of a given link depend on the Spectrum Range of the link.
What is wvOduPartNo?
This read-only string reports the 5-character part number, formatted as ODU-xwyzt, that encodes the Outdoor Unit's regulatory standard (FCC or ETSI) and duplex spacing configuration. An engineer reads this code to determine the exact frequency-plan and duplex characteristics of the installed ODU without needing separate documentation on site. For example, decoding an ODU part number beginning with '1' confirms the unit is built to the FCC (US) standard rather than the European ETSI standard.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.7.7 snmpwalk -v2c -c public <target> CODAN-MIB::wvOduPartNo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.7.7.1 snmpget -v2c -c public <target> CODAN-MIB::wvOduPartNo.1
Start monitoring Codan 8800 DMR microwave radio link equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CODAN-MIB::wvOduPartNo OID value, configure state conditions and alerts, and monitor any Codan 8800 DMR microwave radio link equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.23304 | codanGroup | CODAN-SMI |
| 1.3.6.1.4.1.23304.1 | codanMibs | CODAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.23304.1.1 | minetMIB | CODAN-MIB |
| 1.3.6.1.4.1.23304.1.1.1 | wvConfiguration | CODAN-MIB |
| 1.3.6.1.4.1.23304.1.1.1.7 | wvComponentsRevisions | CODAN-MIB |
| 1.3.6.1.4.1.23304.1.1.1.7.7 | wvOduPartNo | CODAN-MIB |