CODAN-MIB :: wvLinkBERWarningThresholdHigh

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCODAN-MIBwvLinkBERWarningThresholdHigh

wvLinkBERWarningThresholdHigh

Module: CODAN-MIB

OID (symbolic): CODAN-MIB::wvLinkBERWarningThresholdHigh

OID (numeric): 1.3.6.1.4.1.23304.1.1.1.6.4

Node type: OBJECT-TYPE

Type: FloatingPoint

Access: read-write

Description: Defines the high water mark above which the terminal enters the link BER warning alarm state. If wvLinkxxxBER in a given wvLinkThresholdMeasurementInterval gets above this value a wvlinkBERWarningAlarm is set, to be canceled if the value gets below wvLinkBERWarningThresholdLow (see below).

What is wvLinkBERWarningThresholdHigh?

This read-write floating-point object sets the high-water-mark bit error rate above which the terminal raises a link BER warning alarm during each wvLinkThresholdMeasurementInterval window. An administrator tunes this threshold to catch early signs of a degrading microwave hop, such as rain fade, before it becomes a service-affecting error condition. For example, lowering wvLinkBERWarningThresholdHigh on a long, weather-exposed hop gives earlier warning of creeping bit errors than the factory default would.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.6.4
snmpwalk -v2c -c public <target> CODAN-MIB::wvLinkBERWarningThresholdHigh

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.6.4.1
snmpget -v2c -c public <target> CODAN-MIB::wvLinkBERWarningThresholdHigh.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.23304.1.1.1.6.4.1 s <value>

Start monitoring Codan 8800 DMR microwave radio link equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CODAN-MIB::wvLinkBERWarningThresholdHigh OID value, configure state conditions and alerts, and monitor any Codan 8800 DMR microwave radio link equipment from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.23304codanGroupCODAN-SMI
1.3.6.1.4.1.23304.1codanMibsCODAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.23304.1.1minetMIBCODAN-MIB
1.3.6.1.4.1.23304.1.1.1wvConfigurationCODAN-MIB
1.3.6.1.4.1.23304.1.1.1.6wvAlarmControlCODAN-MIB
1.3.6.1.4.1.23304.1.1.1.6.4wvLinkBERWarningThresholdHighCODAN-MIB