All MIBs › CODAN-MIB › wvInstalledPlugInPartNo
wvInstalledPlugInPartNo
Module: CODAN-MIB
OID (symbolic): CODAN-MIB::wvInstalledPlugInPartNo
OID (numeric): 1.3.6.1.4.1.23304.1.1.1.7.1
Node type: OBJECT-TYPE
Type: DisplayString
Access: read-only
Description: The 8800 DMR Plug-In Part No. is defined as PIN-'xyztu', as follows: x - interface type: x=1 - T1/T3, x=2 - E1/E3, x=3 - STS1, x=4 - 10/100Base-T + T1s, x=5 - 10/100Base-T + E1s, x=6, 7, ...- reserved.
y - connector type: for x=1/2, T1/E1 connector type - y=1 - BNC, y=2 - RJ48, y=7 - SCSI, y=8 - SCSI + T3/E3 - BNC for x=4/5, 10/100Base-T + T1/E1 connectors types y=1 - 10/100Base-T - RJ45 + T1/E1 - BNC, y=2 - 10/100Base-T - RJ45 + T1/E1 - RJ48, if no T1/E1s available then y=1 y=3 - 10/100Base-FX - (FIBER) + T1/E1 - BNC, y=4 - 10/100Base-FX - (FIBER) + T1/E1 - RJ48, if no T1/E1s available then y=3
zt- # of T1/E1 interfaces: for x=1/2/3 zt = 00, 01, 02, 04, 08 or 16 for x=4/5 zt = 00, 01, 02, or 04
u - # of high band interfaces: for x=1/2/3, # of T3/E3 interfaces - u = 0 or 1. for x=4/5, # of 10/100Base-T ports - u = 1, 2 or 4.
What is wvInstalledPlugInPartNo?
This read-only string reports the 5-character part-number code, formatted as PIN-xyztu, that identifies the interface and connector type of the plug-in module currently installed in the 8800 DMR terminal, such as T1/T3, E1/E3, or 10/100Base-T combinations. An inventory or provisioning tool reads this code to determine exactly what physical interface hardware is fitted without needing to physically inspect the chassis. For example, decoding a part number starting with '2' would tell an operator the installed plug-in is an E1/E3 interface type rather than T1/T3.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.7.1 snmpwalk -v2c -c public <target> CODAN-MIB::wvInstalledPlugInPartNo
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.7.1.1 snmpget -v2c -c public <target> CODAN-MIB::wvInstalledPlugInPartNo.1
Start monitoring Codan 8800 DMR microwave radio link equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CODAN-MIB::wvInstalledPlugInPartNo OID value, configure state conditions and alerts, and monitor any Codan 8800 DMR microwave radio link equipment from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.23304 | codanGroup | CODAN-SMI |
| 1.3.6.1.4.1.23304.1 | codanMibs | CODAN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.23304.1.1 | minetMIB | CODAN-MIB |
| 1.3.6.1.4.1.23304.1.1.1 | wvConfiguration | CODAN-MIB |
| 1.3.6.1.4.1.23304.1.1.1.7 | wvComponentsRevisions | CODAN-MIB |
| 1.3.6.1.4.1.23304.1.1.1.7.1 | wvInstalledPlugInPartNo | CODAN-MIB |