CODAN-MIB :: wvE1BNC75ohm

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCODAN-MIBwvE1BNC75ohm

wvE1BNC75ohm

Module: CODAN-MIB

OID (symbolic): CODAN-MIB::wvE1BNC75ohm

OID (numeric): 1.3.6.1.4.1.23304.1.1.1.1.36

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: set E1 port to 75ohm.

What is wvE1BNC75ohm?

This value configures the E1 port's line impedance to 75 ohms rather than the alternative balanced setting, to match the physical cabling used at the site. Choosing the wrong impedance setting for the installed cabling would degrade or break the E1 signal. For example, a site using unbalanced coax E1 cabling requires wvE1BNC75ohm set to 'on' to match the connector's impedance.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.1.36
snmpwalk -v2c -c public <target> CODAN-MIB::wvE1BNC75ohm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.23304.1.1.1.1.36.1
snmpget -v2c -c public <target> CODAN-MIB::wvE1BNC75ohm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.23304.1.1.1.1.36.1 i <value>

Start monitoring Codan 8800 DMR microwave radio link equipment with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CODAN-MIB::wvE1BNC75ohm OID value, configure state conditions and alerts, and monitor any Codan 8800 DMR microwave radio link equipment from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.23304codanGroupCODAN-SMI
1.3.6.1.4.1.23304.1codanMibsCODAN-SMI
Numeric OIDNameModule
1.3.6.1.4.1.23304.1.1minetMIBCODAN-MIB
1.3.6.1.4.1.23304.1.1.1wvConfigurationCODAN-MIB
1.3.6.1.4.1.23304.1.1.1.1wvLinkSettingsCODAN-MIB
1.3.6.1.4.1.23304.1.1.1.1.36wvE1BNC75ohmCODAN-MIB