All MIBs › CMC-MIB › cmcIpFiltStatus
cmcIpFiltStatus
Module: CMC-MIB
OID (symbolic): CMC-MIB::cmcIpFiltStatus
OID (numeric): 1.3.6.1.4.1.44.2.1.4.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The status of IP Filtering.
What is cmcIpFiltStatus?
This INTEGER (disabled/enabled) is the master switch for whether IP filtering is active on the system. An admin sets this to enabled(2) to turn on enforcement of the configured cmcIpFilt table entries. For example, after building out a full set of filter rules in the IP filter table, an operator would set cmcIpFiltStatus to enabled(2) to actually start enforcing them.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.44.2.1.4.4 snmpwalk -v2c -c public <target> CMC-MIB::cmcIpFiltStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.44.2.1.4.4.1 snmpget -v2c -c public <target> CMC-MIB::cmcIpFiltStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.44.2.1.4.4.1 i <value>
Start monitoring Rittal CMC (Computer Multi Control) cabinet monitoring unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CMC-MIB::cmcIpFiltStatus OID value, configure state conditions and alerts, and monitor any Rittal CMC (Computer Multi Control) cabinet monitoring unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.44 | cmc | CMC-MIB |
| 1.3.6.1.4.1.44.2 | cmc_mgmt | CMC-MIB |
| 1.3.6.1.4.1.44.2.1 | cmc_mib | CMC-MIB |
| 1.3.6.1.4.1.44.2.1.4 | cmc_ip | CMC-MIB |
| 1.3.6.1.4.1.44.2.1.4.4 | cmcIpFiltStatus | CMC-MIB |