CISCOSB-rlFft :: rlInetFftNextHopReferenceCount

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-rlFftrlInetFftNextHopReferenceCount

rlInetFftNextHopReferenceCount

Module: CISCOSB-rlFft

OID (symbolic): CISCOSB-rlFft::rlInetFftNextHopReferenceCount

OID (numeric): 1.3.6.1.4.1.9.6.1.101.47.1.16.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: IF LPM is supported: If ecmp supported: the field NextHop_ref_count used to save number of NextHop SETs that use the NextHop. Otherwise, NextHop_ref_count used to save number of NFFT entries that use the NextHop. IF LPM is NOT supported: NextHop_ref_count used to save number of Remote SFFT entries that use the NextHop.

What is rlInetFftNextHopReferenceCount?

This read-only INTEGER counts how many other table entries (ECMP NextHop sets, NFFT entries, or remote SFFT entries, depending on whether LPM/ECMP is supported) currently reference this shared next-hop record. It's useful for understanding how heavily a given next hop is relied upon before making a change, since a high reference count means many routes would be affected if that next hop became unreachable. For example, before manually clearing a next-hop entry, an admin would check this reference count to gauge how many active routes depend on it.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.47.1.16.1.6
snmpwalk -v2c -c public <target> CISCOSB-rlFft::rlInetFftNextHopReferenceCount

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.47.1.16.1.6.1
snmpget -v2c -c public <target> CISCOSB-rlFft::rlInetFftNextHopReferenceCount.1

Start monitoring Cisco Small Business (SG/SF-series) switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-rlFft::rlInetFftNextHopReferenceCount OID value, configure state conditions and alerts, and monitor any Cisco Small Business (SG/SF-series) switch from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.47rlFFTCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.47.1rlIpFFTCISCOSB-rlFft
1.3.6.1.4.1.9.6.1.101.47.1.16rlInetFftNextHopTableCISCOSB-rlFft
1.3.6.1.4.1.9.6.1.101.47.1.16.1rlInetFftNextHopEntryCISCOSB-rlFft
1.3.6.1.4.1.9.6.1.101.47.1.16.1.6rlInetFftNextHopReferenceCountCISCOSB-rlFft