CISCOSB-TUNNEL-MIB :: rlTunnelIfLocalAddressInterfaceId

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCOSB-TUNNEL-MIB › rlTunnelIfLocalAddressInterfaceId

rlTunnelIfLocalAddressInterfaceId

Module: CISCOSB-TUNNEL-MIB

OID (symbolic): CISCOSB-TUNNEL-MIB::rlTunnelIfLocalAddressInterfaceId

OID (numeric): 1.3.6.1.4.1.9.6.1.101.122.11.1.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: Interface ID, used to determine Local address for tunnel interface if rlTunnelIfLocalAddressSource set to interface.

What is rlTunnelIfLocalAddressInterfaceId?

This read-write Unsigned32 specifies the interface ID used to determine the tunnel's local address when rlTunnelIfLocalAddressSource is set to interface. An admin using interface-based address selection must set this to the correct interface so the tunnel's source address tracks the intended, stable interface's address. For example, pointing this at the loopback or management interface's ID ensures the tunnel's local address doesn't change if a physical port's IP is reassigned.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.122.11.1.1.3
snmpwalk -v2c -c public <target> CISCOSB-TUNNEL-MIB::rlTunnelIfLocalAddressInterfaceId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.122.11.1.1.3.1
snmpget -v2c -c public <target> CISCOSB-TUNNEL-MIB::rlTunnelIfLocalAddressInterfaceId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.122.11.1.1.3.1 i <value>

Start monitoring Cisco Small Business switches (rlTunnel/switch001 family) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-TUNNEL-MIB::rlTunnelIfLocalAddressInterfaceId OID value, configure state conditions and alerts, and monitor any Cisco Small Business switches (rlTunnel/switch001 family) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.122rlTunnelCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.122.11rlTunnelGeneralCISCOSB-TUNNEL-MIB
1.3.6.1.4.1.9.6.1.101.122.11.1rlTunnelIfTableCISCOSB-TUNNEL-MIB
1.3.6.1.4.1.9.6.1.101.122.11.1.1rlTunnelIfEntryCISCOSB-TUNNEL-MIB
1.3.6.1.4.1.9.6.1.101.122.11.1.1.3rlTunnelIfLocalAddressInterfaceIdCISCOSB-TUNNEL-MIB