All MIBs › CISCOSB-POLICY-MIB › rlPolicyMeteringClassFailMeterPointer
rlPolicyMeteringClassFailMeterPointer
Module: CISCOSB-POLICY-MIB
OID (symbolic): CISCOSB-POLICY-MIB::rlPolicyMeteringClassFailMeterPointer
OID (numeric): 1.3.6.1.4.1.9.6.1.101.59.4.2.1.8
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Specifies an index in the rlPolicyMeterClassTable. This is the meter that is to be used if the packet is out-of-profile relative to the current meter. If non-Diffserv mode, this field is not used. If the current meter is AlwaysConform, this field is not used.
What is rlPolicyMeteringClassFailMeterPointer?
This read-write object specifies the index into the Metering Class table for the meter to use when traffic is out-of-profile relative to the current meter, used only in Diffserv mode and ignored if the current meter is set to always-conform. An admin sets this to chain a fallback, typically stricter, meter for traffic exceeding the primary meter's rate. For example, an admin wanting excess Diffserv traffic beyond the committed rate to be evaluated against a stricter secondary meter would point this field at that fallback metering class.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.59.4.2.1.8 snmpwalk -v2c -c public <target> CISCOSB-POLICY-MIB::rlPolicyMeteringClassFailMeterPointer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.59.4.2.1.8.1 snmpget -v2c -c public <target> CISCOSB-POLICY-MIB::rlPolicyMeteringClassFailMeterPointer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.59.4.2.1.8.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rlPolicyMeteringClassFailMeterPointer.1
Start monitoring Cisco Small Business managed switches (CISCOSB series) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-POLICY-MIB::rlPolicyMeteringClassFailMeterPointer OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switches (CISCOSB series) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.59 | rlPolicy | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.59.4 | rlPolicyMeterClass | CISCOSB-POLICY-MIB |
| 1.3.6.1.4.1.9.6.1.101.59.4.2 | rlPolicyMeterClassTable | CISCOSB-POLICY-MIB |
| 1.3.6.1.4.1.9.6.1.101.59.4.2.1 | rlPolicyMeteringClassEntry | CISCOSB-POLICY-MIB |
| 1.3.6.1.4.1.9.6.1.101.59.4.2.1.8 | rlPolicyMeteringClassFailMeterPointer | CISCOSB-POLICY-MIB |