CISCOSB-POLICY-MIB :: rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-POLICY-MIBrlPolicyFlowClassificationOffsetsGroupUseEtherTypeId

rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId

Module: CISCOSB-POLICY-MIB

OID (symbolic): CISCOSB-POLICY-MIB::rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId

OID (numeric): 1.3.6.1.4.1.9.6.1.101.59.2.2.1.10

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: Indicates whether or not the EtherType is usable in Policy Rule definitions for bridged packets

What is rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId?

This read-write TruthValue indicates whether EtherType can be used as a match criterion for bridged packets in Policy Rule definitions. An admin enables this to build rules that distinguish traffic by its Layer 2 protocol type, such as separating IPv4 from IPv6 or other protocols at the bridging layer. For example, an admin wanting a rule that treats ARP frames differently from IP frames at Layer 2 would need this object enabled to match on EtherType.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.59.2.2.1.10
snmpwalk -v2c -c public <target> CISCOSB-POLICY-MIB::rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.59.2.2.1.10.1
snmpget -v2c -c public <target> CISCOSB-POLICY-MIB::rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.59.2.2.1.10.1 s <value>

Start monitoring Cisco Small Business managed switches (CISCOSB series) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-POLICY-MIB::rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switches (CISCOSB series) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
1.3.6.1.4.1.9.6.1.101.59rlPolicyCISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.59.2rlPolicyClassifierCISCOSB-POLICY-MIB
1.3.6.1.4.1.9.6.1.101.59.2.2rlPolicyFlowClassificationOffsetsTableCISCOSB-POLICY-MIB
1.3.6.1.4.1.9.6.1.101.59.2.2.1rlPolicyFlowClassificationOffsetsGroupEntryCISCOSB-POLICY-MIB
1.3.6.1.4.1.9.6.1.101.59.2.2.1.10rlPolicyFlowClassificationOffsetsGroupUseEtherTypeIdCISCOSB-POLICY-MIB