All MIBs › CISCOSB-POLICY-MIB › rlPolicyFlowClassificationOffsetsGroupOffsetType
rlPolicyFlowClassificationOffsetsGroupOffsetType
Module: CISCOSB-POLICY-MIB
OID (symbolic): CISCOSB-POLICY-MIB::rlPolicyFlowClassificationOffsetsGroupOffsetType
OID (numeric): 1.3.6.1.4.1.9.6.1.101.59.2.2.1.3
Node type: OBJECT-TYPE
Type: OBJECT IDENTIFIER
Access: read-write
Description: Indicates whether the corresponding byte denotes an offset from beginning of L2, from the beginning of L3 IPv4 packet data or from the beginning of L3 IPv6 packet data. Each byte in the OID contains either: (1) - L2 offset (2) - L3 Offset (3) - L3 IPv6 Offset
What is rlPolicyFlowClassificationOffsetsGroupOffsetType?
This read-write object indicates, per byte in the corresponding offset list, whether that offset is measured from the start of Layer 2, Layer 3 IPv4, or Layer 3 IPv6 packet data. An admin sets this alongside rlPolicyFlowClassificationOffsetsGroupOffset to specify the reference point for each configured byte offset. For example, an admin defining an offset meant to land on a field inside the IPv6 header would mark that byte's type as the L3-IPv6 offset type rather than L2 or IPv4.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.59.2.2.1.3 snmpwalk -v2c -c public <target> CISCOSB-POLICY-MIB::rlPolicyFlowClassificationOffsetsGroupOffsetType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.59.2.2.1.3.1 snmpget -v2c -c public <target> CISCOSB-POLICY-MIB::rlPolicyFlowClassificationOffsetsGroupOffsetType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.59.2.2.1.3.1 s <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> rlPolicyFlowClassificationOffsetsGroupOffsetType.1
Start monitoring Cisco Small Business managed switches (CISCOSB series) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-POLICY-MIB::rlPolicyFlowClassificationOffsetsGroupOffsetType OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switches (CISCOSB series) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.59 | rlPolicy | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.59.2 | rlPolicyClassifier | CISCOSB-POLICY-MIB |
| 1.3.6.1.4.1.9.6.1.101.59.2.2 | rlPolicyFlowClassificationOffsetsTable | CISCOSB-POLICY-MIB |
| 1.3.6.1.4.1.9.6.1.101.59.2.2.1 | rlPolicyFlowClassificationOffsetsGroupEntry | CISCOSB-POLICY-MIB |
| 1.3.6.1.4.1.9.6.1.101.59.2.2.1.3 | rlPolicyFlowClassificationOffsetsGroupOffsetType | CISCOSB-POLICY-MIB |