All MIBs › CISCOSB-PHY-MIB › rlPhyTestSetType
rlPhyTestSetType
Module: CISCOSB-PHY-MIB
OID (symbolic): CISCOSB-PHY-MIB::rlPhyTestSetType
OID (numeric): 1.3.6.1.4.1.9.6.1.101.90.1.1.1.1
Node type: OBJECT-TYPE
Type: RlPhyTestType
Access: read-write
Description: A control variable used to start operator initiated interface tests.1 indicates that no test has been initiated. Only operator initiated interface tests can be set to this variable.
What is rlPhyTestSetType?
This read-write RlPhyTestType is a control variable used to start operator-initiated interface tests, with a value of 1 meaning no test has been initiated. Writing a test type here triggers a physical-layer diagnostic, such as a cable test, on that specific port. For example, setting this to the cable-diagnostic test value on a port kicks off a cable-length or fault test on that interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.90.1.1.1.1 snmpwalk -v2c -c public <target> CISCOSB-PHY-MIB::rlPhyTestSetType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.90.1.1.1.1.1 snmpget -v2c -c public <target> CISCOSB-PHY-MIB::rlPhyTestSetType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.90.1.1.1.1.1 s <value>
Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-PHY-MIB::rlPhyTestSetType OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.90 | rlPhy | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.90.1 | rlPhyTest | CISCOSB-PHY-MIB |
| 1.3.6.1.4.1.9.6.1.101.90.1.1 | rlPhyTestSetTable | CISCOSB-PHY-MIB |
| 1.3.6.1.4.1.9.6.1.101.90.1.1.1 | rlPhyTestSetEntry | CISCOSB-PHY-MIB |
| 1.3.6.1.4.1.9.6.1.101.90.1.1.1.1 | rlPhyTestSetType | CISCOSB-PHY-MIB |