All MIBs › CISCOSB-PHY-MIB › rlPhyTestGetUnits
rlPhyTestGetUnits
Module: CISCOSB-PHY-MIB
OID (symbolic): CISCOSB-PHY-MIB::rlPhyTestGetUnits
OID (numeric): 1.3.6.1.4.1.9.6.1.101.90.1.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The test result unit of measure. The units can be standard unit or special units that are designed for special test.
The alaskaPhyLength unit is design for the VCT diagnostic and its values are: less_than_50M(1), 50-80M(2), 80-110M(3), 110-140M(4), more_than_140M(5).
The alaskaPhyStatus unit is design for the VCT diagnostic and its values are: 4_pair_cable(1), 2_pair_cable(2), no_cable(3), open_cable(4), short_cable(5), bad_cable(6), impedance_mismatch(7).
What is rlPhyTestGetUnits?
This read-only INTEGER indicates the unit of measure for a test result, which can be a standard unit like meters or degrees, or a special unit designed for a specific diagnostic such as VCT cable-length or cable-status categories. It tells the admin how to interpret the raw number in rlPhyTestGetResult. For example, this field showing meter(6) tells the admin to interpret the test result as a cable-length measurement in meters rather than as a boolean pass/fail.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.90.1.2.1.4 snmpwalk -v2c -c public <target> CISCOSB-PHY-MIB::rlPhyTestGetUnits
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.90.1.2.1.4.1 snmpget -v2c -c public <target> CISCOSB-PHY-MIB::rlPhyTestGetUnits.1
Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-PHY-MIB::rlPhyTestGetUnits OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.90 | rlPhy | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.90.1 | rlPhyTest | CISCOSB-PHY-MIB |
| 1.3.6.1.4.1.9.6.1.101.90.1.2 | rlPhyTestGetTable | CISCOSB-PHY-MIB |
| 1.3.6.1.4.1.9.6.1.101.90.1.2.1 | rlPhyTestGetEntry | CISCOSB-PHY-MIB |
| 1.3.6.1.4.1.9.6.1.101.90.1.2.1.4 | rlPhyTestGetUnits | CISCOSB-PHY-MIB |