All MIBs › CISCOSB-PHY-MIB › rlPhyTestGetStatus
rlPhyTestGetStatus
Module: CISCOSB-PHY-MIB
OID (symbolic): CISCOSB-PHY-MIB::rlPhyTestGetStatus
OID (numeric): 1.3.6.1.4.1.9.6.1.101.90.1.2.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object contains the status of the most recently requested test for operator initiated tests or the value none(1) if no tests have been requested since the last reset. For non operator initiated tests the value is always none(1). Note that this facility provides no provision for saving the results of one test when starting another, as could be required if used by multiple managers concurrently.
What is rlPhyTestGetStatus?
This read-only INTEGER reports the status of the most recently requested operator-initiated test on this port, using values like none, success, inProgress, notSupported, unAbleToRun, aborted, and failed, with no provision for saving one test's results when another is started by a different manager. It tells the admin whether a diagnostic test on a given port actually completed successfully. For example, this field showing failed(7) after a cable test tells the admin the port's diagnostic didn't complete successfully, warranting a manual cable check.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.90.1.2.1.2 snmpwalk -v2c -c public <target> CISCOSB-PHY-MIB::rlPhyTestGetStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.90.1.2.1.2.1 snmpget -v2c -c public <target> CISCOSB-PHY-MIB::rlPhyTestGetStatus.1
Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-PHY-MIB::rlPhyTestGetStatus OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.90 | rlPhy | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.90.1 | rlPhyTest | CISCOSB-PHY-MIB |
| 1.3.6.1.4.1.9.6.1.101.90.1.2 | rlPhyTestGetTable | CISCOSB-PHY-MIB |
| 1.3.6.1.4.1.9.6.1.101.90.1.2.1 | rlPhyTestGetEntry | CISCOSB-PHY-MIB |
| 1.3.6.1.4.1.9.6.1.101.90.1.2.1.2 | rlPhyTestGetStatus | CISCOSB-PHY-MIB |