All MIBs › CISCOSB-DHCPCL-MIB › rlDhcpClAutoUpdateProtocol
rlDhcpClAutoUpdateProtocol
Module: CISCOSB-DHCPCL-MIB
OID (symbolic): CISCOSB-DHCPCL-MIB::rlDhcpClAutoUpdateProtocol
OID (numeric): 1.3.6.1.4.1.9.6.1.101.76.30
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Describes the auto-update process protocol. tftp - only the TFTP protocol is used by auto-update. scp - only the SCP protocol is used by auto-update. auto-(Default) Auto-update uses the TFTP or SCP protocol depending on the configuration file's extension. If this option is selected, the extension parameter may be specified or, if not, the default extension is used.
What is rlDhcpClAutoUpdateProtocol?
This read-write INTEGER selects the protocol used for the auto-update process: tftp(1), scp(2), or auto(3), where auto is the default and chooses TFTP or SCP based on the configuration file's extension. An admin sets this to control or constrain which file transfer protocol the device uses when fetching firmware during auto-update. For example, setting this to tftp(1) forces the device to only use TFTP for downloading firmware images during auto-update, ignoring any SCP-based option.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.76.30 snmpwalk -v2c -c public <target> CISCOSB-DHCPCL-MIB::rlDhcpClAutoUpdateProtocol
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.76.30.1 snmpget -v2c -c public <target> CISCOSB-DHCPCL-MIB::rlDhcpClAutoUpdateProtocol.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.76.30.1 i <value>
Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-DHCPCL-MIB::rlDhcpClAutoUpdateProtocol OID value, configure state conditions and alerts, and monitor any Cisco Small Business managed switch from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.76 | rlDhcpCl | CISCOSB-DHCPCL-MIB |
| 1.3.6.1.4.1.9.6.1.101.76.30 | rlDhcpClAutoUpdateProtocol | CISCOSB-DHCPCL-MIB |