All MIBs › CISCOSB-CLI-MIB › rlCLIremoteCLIcommand
rlCLIremoteCLIcommand
Module: CISCOSB-CLI-MIB
OID (symbolic): CISCOSB-CLI-MIB::rlCLIremoteCLIcommand
OID (numeric): 1.3.6.1.4.1.9.6.1.101.52.6.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Commands that can be given for execution of CLI from remote: takeRemoteCLI: take resources of remote CLI activation releaseRemoteCLI: free resources of remote CLI activation applySentCLI: apply the CLI commands that are currently in rlCLIremoteCLIcommandsTable. deleteCommandsCLI: delete all the CLI commands that are currently in rlCLIremoteCLIcommandsTable. setEchoModeCLI: entered commands will appear before its output in rlCLIremoteCLIoutputsTable. unsetEchoModeCLI: entered commands will not appear in rlCLIremoteCLIoutputsTable.
What is rlCLIremoteCLIcommand?
This read-write integer issues control commands for the remote CLI feature, such as taking or releasing the remote CLI resource, applying commands staged in the remote CLI commands table, deleting staged commands, or setting echo mode. An admin (or, more typically, management software) writes to it to drive the lifecycle of a remote CLI session step by step. For example, a remote management application would first set this object to takeRemoteCLI(1) to reserve the resource, then later to applySentCLI(3) to execute the commands it had staged.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.52.6.1 snmpwalk -v2c -c public <target> CISCOSB-CLI-MIB::rlCLIremoteCLIcommand
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.52.6.1.1 snmpget -v2c -c public <target> CISCOSB-CLI-MIB::rlCLIremoteCLIcommand.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.52.6.1.1 i <value>
Start monitoring Cisco Small Business switches and routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-CLI-MIB::rlCLIremoteCLIcommand OID value, configure state conditions and alerts, and monitor any Cisco Small Business switches and routers from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.6 | otherEnterprises | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1 | ciscoSB | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.6.1.101.52 | rlCli | CISCOSB-CLI-MIB |
| 1.3.6.1.4.1.9.6.1.101.52.6 | rlCLIremoteCLIsupport | CISCOSB-CLI-MIB |
| 1.3.6.1.4.1.9.6.1.101.52.6.1 | rlCLIremoteCLIcommand | CISCOSB-CLI-MIB |