CISCOSB-BRIDGEMIBOBJECTS-MIB :: rldot1wRStpForceVersionState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCOSB-BRIDGEMIBOBJECTS-MIBrldot1wRStpForceVersionState

rldot1wRStpForceVersionState

Module: CISCOSB-BRIDGEMIBOBJECTS-MIB

OID (symbolic): CISCOSB-BRIDGEMIBOBJECTS-MIB::rldot1wRStpForceVersionState

OID (numeric): 1.3.6.1.4.1.9.6.1.101.57.4.2.1.2

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies whether this Bridge uses the normal RSTP algorithm, or STP Compatibility algorythm: 0 - STP Compatibility 2 - Normal RSTP

What is rldot1wRStpForceVersionState?

This read-write integer specifies whether the bridge runs the normal RSTP algorithm(2) or falls back to STP Compatibility mode(0) for a given VLAN/port entry. An admin cares because forcing STP-compatibility mode is sometimes needed when connecting to older switches that only understand classic Spanning Tree. For example, an engineer linking a legacy STP-only switch into an RSTP network would set this object to 0 on that link to avoid protocol-version conflicts and slower reconvergence.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.57.4.2.1.2
snmpwalk -v2c -c public <target> CISCOSB-BRIDGEMIBOBJECTS-MIB::rldot1wRStpForceVersionState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.57.4.2.1.2.1
snmpget -v2c -c public <target> CISCOSB-BRIDGEMIBOBJECTS-MIB::rldot1wRStpForceVersionState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.57.4.2.1.2.1 i <value>

Start monitoring Cisco Business 350 Series Managed Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCOSB-BRIDGEMIBOBJECTS-MIB::rldot1wRStpForceVersionState OID value, configure state conditions and alerts, and monitor any Cisco Business 350 Series Managed Switch from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.6otherEnterprisesCISCO-SMI
1.3.6.1.4.1.9.6.1ciscoSBCISCO-SMI
1.3.6.1.4.1.9.6.1.101switch001CISCOSB-MIB
Numeric OIDNameModule
1.3.6.1.4.1.9.6.1.101.57rlpBridgeMIBObjectsCISCOSB-BRIDGEMIBOBJECTS-MIB
1.3.6.1.4.1.9.6.1.101.57.4rldot1wRStpCISCOSB-BRIDGEMIBOBJECTS-MIB
1.3.6.1.4.1.9.6.1.101.57.4.2rldot1wRStpForceVersionTableCISCOSB-BRIDGEMIBOBJECTS-MIB
1.3.6.1.4.1.9.6.1.101.57.4.2.1rldot1wRStpForceVersionEntryCISCOSB-BRIDGEMIBOBJECTS-MIB
1.3.6.1.4.1.9.6.1.101.57.4.2.1.2rldot1wRStpForceVersionStateCISCOSB-BRIDGEMIBOBJECTS-MIB