All MIBs › CISCOSB-BRIDGEMIBOBJECTS-MIB › rldot1dStpExtendedPortNumberFormat
rldot1dStpExtendedPortNumberFormat
Module: CISCOSB-BRIDGEMIBOBJECTS-MIB
OID (symbolic): CISCOSB-BRIDGEMIBOBJECTS-MIB::rldot1dStpExtendedPortNumberFormat
OID (numeric): 1.3.6.1.4.1.9.6.1.101.57.2.5
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description:
Specifies whether the STP uses the extended port fnumber format.
What is rldot1dStpExtendedPortNumberFormat?
This OID enables or disables extended port numbering for Spanning Tree Protocol (used to prevent network loops). Extended numbering supports more ports than the standard format. An operator would enable this on large switches to support all physical ports in loop prevention.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.57.2.5 snmpwalk -v2c -c public <target> CISCOSB-BRIDGEMIBOBJECTS-MIB::rldot1dStpExtendedPortNumberFormat
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.6.1.101.57.2.5.1 snmpget -v2c -c public <target> CISCOSB-BRIDGEMIBOBJECTS-MIB::rldot1dStpExtendedPortNumberFormat.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.6.1.101.57.2.5.1 s <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.9 | cisco | CISCO-SMI |
| 1.3.6.1.4.1.9.6 | ciscoPartnerProducts | CISCO-SMI |
| 1.3.6.1.4.1.9.6.1.101 | switch001 | CISCOSB-MIB |
| 1.3.6.1.4.1.9.6.1.101.57 | rlpBridgeMIBObjects | CISCOSB-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.9.6.1.101.57.2 | rldot1dStp | CISCOSB-BRIDGEMIBOBJECTS-MIB |
| 1.3.6.1.4.1.9.6.1.101.57.2.5 | rldot1dStpExtendedPortNumberFormat | CISCOSB-BRIDGEMIBOBJECTS-MIB |