All MIBs › CISCO-ZS-EXT-MIB › czseSessionOwner
czseSessionOwner
Module: CISCO-ZS-EXT-MIB
OID (symbolic): CISCO-ZS-EXT-MIB::czseSessionOwner
OID (numeric): 1.3.6.1.4.1.9.9.427.1.1.4.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: This object specifies the owner for this session.
If the value of the corresponding instance of czseSessionOwnerType object is 'cli', this object will contain the user name of the CLI (Command Line Interface) user, who is the owner of the session on this VSAN.
If the value of the corresponding instance of czseSessionOwnerType is 'gs4client', this object will contain the FCID of the GS4 management station, which is the owner of the session on this VSAN.
If the value of the corresponding instance of czseSessionOwnerType is 'snmp', this object will contain the IP address of the management station, which is the owner of the session on this VSAN.
What is czseSessionOwner?
This read-only OCTET STRING (0-64 bytes) identifies the owner of a zoning session, containing the CLI username if the corresponding czseSessionOwnerType is 'cli', or a different identifier format if the owner type is 'gs4client'. Admins use it to determine exactly who or what holds a zoning session, which matters when a session needs to be cleared or its changes committed by the rightful owner. For example, an admin needing to clean up a stale zoning session left open by a disconnected CLI user would read this object to confirm which user's session it is before taking action.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.427.1.1.4.1.2 snmpwalk -v2c -c public <target> CISCO-ZS-EXT-MIB::czseSessionOwner
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.427.1.1.4.1.2.1 snmpget -v2c -c public <target> CISCO-ZS-EXT-MIB::czseSessionOwner.1
Start monitoring Cisco MDS Fibre Channel SAN switches/directors with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ZS-EXT-MIB::czseSessionOwner OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches/directors from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.427 | ciscoZsExtMIB | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1 | ciscoZsExtMIBObjects | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1 | czseConfiguration | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1.4 | czseSessionTable | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1.4.1 | czseSessionEntry | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1.4.1.2 | czseSessionOwner | CISCO-ZS-EXT-MIB |