All MIBs › CISCO-ZS-EXT-MIB › czseOperationMode
czseOperationMode
Module: CISCO-ZS-EXT-MIB
OID (symbolic): CISCO-ZS-EXT-MIB::czseOperationMode
OID (numeric): 1.3.6.1.4.1.9.9.427.1.1.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object when set to 'basic(1)', results in the zone server operating in the basic mode as defined by FC-GS4 standards.
This object when set to 'enhanced(2)', results in the zone server operating in the enhanced mode as defined by FC-GS4 standards.
The local zone server can move to the enhanced mode of operation only if all devices in the Fibre Channel fabric are capable of working in enhanced mode. Otherwise, the set operation trying to set this object to 'enhanced(2)' will fail.
What is czseOperationMode?
This read-write INTEGER selects whether the local Zone Server operates in basic(1) mode, per FC-GS4 standards, or enhanced(2) mode, also per FC-GS4, on a given VSAN, with the move to enhanced mode possible only if all devices in the fabric support it. Admins care because enhanced mode typically offers stronger consistency and locking semantics for zoning changes across a fabric. For example, an admin wanting fabric-wide zoning change protection would set this object to enhanced(2), but only after confirming all fabric switches support it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.427.1.1.2.1.1 snmpwalk -v2c -c public <target> CISCO-ZS-EXT-MIB::czseOperationMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.427.1.1.2.1.1.1 snmpget -v2c -c public <target> CISCO-ZS-EXT-MIB::czseOperationMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.427.1.1.2.1.1.1 i <value>
Start monitoring Cisco MDS Fibre Channel SAN switches/directors with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ZS-EXT-MIB::czseOperationMode OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches/directors from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.427 | ciscoZsExtMIB | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1 | ciscoZsExtMIBObjects | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1 | czseConfiguration | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1.2 | czseModeTable | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1.2.1 | czseModeEntry | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1.2.1.1 | czseOperationMode | CISCO-ZS-EXT-MIB |