All MIBs › CISCO-ZS-EXT-MIB › czseCapabilityObject
czseCapabilityObject
Module: CISCO-ZS-EXT-MIB
OID (symbolic): CISCO-ZS-EXT-MIB::czseCapabilityObject
OID (numeric): 1.3.6.1.4.1.9.9.427.1.1.1.1.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This bitmap represents the capability of the local Zone Server on this VSAN.
If 'enhancedMode(0)' bit is set, the local Zone Server is capable of supporting enhanced Zoning mode of operation. If this bit is reset, it does not have this capability.
If 'zsetDb(1)' bit is set, the local Zone Server supports maintaining of zoneset database. If this bit is reset, the local Zone Server does not allow maintaining of zoneset database.
If 'dirAct(2)' bit is set, the local Zone Server supports direct activation command. If this bit is reset, the local Zone Server does not support this.
If 'hardZoning(3)' bit is set, the local Zone Server supports hard zoning. If this bit is reset, the local Zone Server does not support hard zoning.
What is czseCapabilityObject?
This read-only BITS object reports the local Zone Server's capabilities on a given VSAN, including bits for enhancedMode (support for enhanced zoning), zsetDb (maintaining a zoneset database), dirAct, and hardZoning; a set bit means that capability is supported, a reset bit means it is not. Admins use this to determine what zoning features are actually available on a switch before attempting to configure them. For example, before trying to enable enhanced zoning mode on a VSAN, an admin would check that the enhancedMode bit is set in this object for the local zone server.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.427.1.1.1.1.1 snmpwalk -v2c -c public <target> CISCO-ZS-EXT-MIB::czseCapabilityObject
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.427.1.1.1.1.1.1 snmpget -v2c -c public <target> CISCO-ZS-EXT-MIB::czseCapabilityObject.1
Start monitoring Cisco MDS Fibre Channel SAN switches/directors with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ZS-EXT-MIB::czseCapabilityObject OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches/directors from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.427 | ciscoZsExtMIB | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1 | ciscoZsExtMIBObjects | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1 | czseConfiguration | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1.1 | czseCapabilityTable | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1.1.1 | czseCapabilityEntry | CISCO-ZS-EXT-MIB |
| 1.3.6.1.4.1.9.9.427.1.1.1.1.1 | czseCapabilityObject | CISCO-ZS-EXT-MIB |