All MIBs › CISCO-WPAN-MIB › cwpanIfServiceStatusReason
cwpanIfServiceStatusReason
Module: CISCO-WPAN-MIB
OID (symbolic): CISCO-WPAN-MIB::cwpanIfServiceStatusReason
OID (numeric): 1.3.6.1.4.1.9.9.819.1.1.1.1.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the reason of the last state change of the WPAN service associated with this given interface.
unknown (1) - unknown powerDown (2) - power down WPAN module powerUp (3) - power up WPAN module moduleRemove (4) - module removed moduleReload (5) - power cycle WPAN module driverStop (6) - driver stop driverStart (7) - driver start firmwareUpgrade (8) - firmware upgrade firmwareReset (9) - firmware reset watchDog (10) - watchdog triggered
What is cwpanIfServiceStatusReason?
This read-only object reports the specific reason behind the most recent change in the WPAN service's status on this interface, such as powerDown, moduleRemove, or firmwareUpgrade. It gives an admin context for why cwpanIfServiceStatus transitioned to its current value rather than leaving them to guess. For example, if cwpanIfServiceStatus shows stop and cwpanIfServiceStatusReason shows moduleRemove, the admin immediately knows the WPAN radio module was physically pulled rather than suspecting a software crash.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.819.1.1.1.1.2 snmpwalk -v2c -c public <target> CISCO-WPAN-MIB::cwpanIfServiceStatusReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.819.1.1.1.1.2.1 snmpget -v2c -c public <target> CISCO-WPAN-MIB::cwpanIfServiceStatusReason.1
Start monitoring Cisco Connected Grid Router / WPAN mesh gateway (802.15.4) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WPAN-MIB::cwpanIfServiceStatusReason OID value, configure state conditions and alerts, and monitor any Cisco Connected Grid Router / WPAN mesh gateway (802.15.4) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.819 | ciscoWpanMIB | CISCO-WPAN-MIB |
| 1.3.6.1.4.1.9.9.819.1 | ciscoWpanMIBObjects | CISCO-WPAN-MIB |
| 1.3.6.1.4.1.9.9.819.1.1 | ciscoWpanConfig | CISCO-WPAN-MIB |
| 1.3.6.1.4.1.9.9.819.1.1.1 | cwpanInterfaceTable | CISCO-WPAN-MIB |
| 1.3.6.1.4.1.9.9.819.1.1.1.1 | cwpanInterfaceEntry | CISCO-WPAN-MIB |
| 1.3.6.1.4.1.9.9.819.1.1.1.1.2 | cwpanIfServiceStatusReason | CISCO-WPAN-MIB |